Front Fender Installation
Installation guide for the front fender of all the CycleBoard models.
Required Equipment
- 3 mm Allen
Procedures
- Screw Alignment - Slide the fender into place and rotate the wheel to align the top hole with the hole in the wheel.
- Fender Screws Installation- Install the top fender screw with a 3 mm Allen (some models may require a 4 mm Allen) and rotate the wheel to align the hole in the wheel with the holes in each of the bottom holes (3 screws per fender).
If the fender rubs on the tire then pull up and out on the outer edge offender to make more space. The fenders are designed to be flexible and stand up to abuse and they will not be damaged by pulling on them.
Have more questions? Contact support@cycleboard.com
